Focused arrival windows
Useful updates and clear arrival timing.
Skylights are a common leak point because they cut a large opening in the roof. Before replacing anything, it is worth finding out whether the leak is the flashing, the skylight itself or simply condensation.
Useful updates and clear arrival timing.
Review the approach and price before deciding.
Equipped vehicles and respectful cleanup.
Neighbors serving neighbors with follow-through.
A skylight is a window set into the roof, surrounded by flashing that has to carry water around it from every direction. Water that gets past that flashing runs into the light shaft and shows up as stains or drips around the skylight.
Common causes include worn or incorrectly installed flashing, failed sealant, a cracked or damaged frame, and in older units, seal failure in the glass. Leaves and debris can also dam water above the skylight, pushing it under the flashing.
Many skylight problems are not leaks at all. Moisture on the inside of the glass can be condensation from humid indoor air. A foggy or hazy look between the glass layers means the glazing seal has failed, which is a skylight issue but not a roof leak.

Water entering at the flashing runs down the shaft walls and onto the ceiling.
Moisture over time lifts paint and can lead to mold.
Small flashing gaps often leak only when water is pushed sideways.
Impact or age can crack the frame or glass.
This points to glazing seal failure, which is not a roof leak but may mean replacement.
Often due to indoor humidity and cold surfaces, not a leak.
Flashing around the skylight corrodes, loosens or was not installed to suit the skylight model.
Sealant at the frame and flashing dries and cracks.
Leaves and debris above the skylight hold water against the flashing.
Frames and seals wear out over time, and impact can damage them.

Check whether the moisture is from the roof or from indoor humidity.
Check the frame, glazing, flashing, sealant and surrounding shingles.
Look for stains and moisture to help trace where water enters.
Install proper flashing or a flashing kit, reseal or replace the skylight if it is damaged or failing.
Confirm the area is watertight and leave the work area clean.
The right answer depends on the cause, the roof’s age and condition. Here is how to think about it.
The skylight itself is sound and the leak is at the flashing or sealant.
The frame is cracked, glazing is failing or the unit is old enough that repair is not worthwhile.
Skylight makers supply flashing kits designed for their units. Ask whether one is being used.
Leaks rarely have a single cause. These related services cover the other places water commonly gets in.
Want to know what repairs involve before you call? Read our guides to roof leak repair costs in Baton Rouge, common roof repair price factors and what to do when your roof leaks in heavy rain. Back to the main roof leak repair page.
Condensation forms on the inside of the glass in humid conditions and does not usually leave stains on the shaft. Leaks show as stains, drips or wet material around the skylight, especially after rain.
Often yes, if the unit is sound and the problem is flashing or sealant.
That is a failed glazing seal. It is not a roof leak, but the unit may need replacement.
Heavy, wind-driven rain pushes water under flashing that handles normal rain. That points to flashing details.
It is often sensible to reflash or replace it at the same time, because doing so later means disturbing a new roof.
Many manufacturers specify one for their unit. Ask what flashing method is planned.
Not seeing your question? Send us a message and we will explain it plainly.
Ask the local teamSelect your area for local roofing details, or contact us to confirm your address.
Send a message through the form and tell us what you are seeing. Include the location of the stain or drip and when it appears so the team can understand what help you need.